Turbocharger Hose for auto

Engine auto parts: Turbocharger Hose

How to detect the air intake system failure

Inspection of the air intake system is performed in several stages. First check the integrity of the intake line, and then its individual components performance. The diagnostic procedure method is chosen by specialists depending on the failure symptoms.

Compressed air and a smoke machine are usually used at a service station to detect leakage. At an independent check, you can use a soap solution and compressed air.

Sensors and regulators are assessed with a multimeter. First, connect the gauge to the corresponding terminals of the tested device and measure its resistance. If it does not match the nominal value, then there is a breakage in the part winding. Then, use the multimeter to measure the voltage at the terminals of the power wire and compare the obtained data with the values ​​indicated in the car technical documentation.

The valves and flaps operation is usually inspected under conditions simulating actual performance.

You may identify that the air intake system needs a diagnosis by the following signs:

  • increase in the fuel consumption;
  • unstable engine operation at idle and during acceleration;
  • black smoke from the exhaust pipe;
  • loss of engine power;
  • deterioration of the car dynamic performance;
  • Check Engine light flashes on the dashboard;
  • abnormal sounds from the engine compartment during the power unit operation;
  • frequent engine overheating.

Causes of the air intake system failures

Many air intake system failures are caused by contamination: delayed air filter replacement or its poor quality, as well as poor tightness of the pipeline lead to the ingress of dust and moisture inside the intake line. The deposit accumulation causes jamming of valves and flaps, impaired throughput capacity of channels and swirl chambers. The same consequences also result from the increased formation of oil deposit caused by faults of the engine, the crankcase ventilation system, wear of the valve stem seals, frequent short distance trips.

Moisture, dirt and carbon deposits pose a significant risk also to the air intake system electrical components. They can cause oxidation of terminals and decrease the sensors sensitivity.

Often, the intake system failures are connected with the vehicle adverse operating conditions. Due to temperature changes or vehicle storage outdoors, the air supply hose or the charger intake hose may crack. Driving on poor-quality surfaced roads, aggressive driving style, increased engine vibration can cause loosening of fasteners and clamps.

Often, the tightness of the intake system is violated due to mechanical damages, aging of sealing components, for instance, sensor rubber rings or intake manifold gaskets, as well as due to burnout of the manifold.

Repair and replacement of the air intake system

Usually the repair of the air intake system comprises cleaning its components from dirt and carbon deposits, as well as replacing faulty components: sensors, flaps, valves, hoses, connecting pipes, fasteners and clamps, and sometimes the intake manifold.

The procedure complexity is directly dependent on the damage degree and the replacement parts location. You can find more detailed instructions in the car technical documents.

Replacement of the entire intake system is usually performed as part of tuning in order to improve the car sports characteristics.

Popular Turbocharger Hose manufacturers
Original Turbocharger Hose from ABAKUS producer Original Turbocharger Hose from MOTAIR producer Original Turbocharger Hose from THERMOTEC producer Original Turbocharger Hose from BORG & BECK producer Original Turbocharger Hose from Metalcaucho producer Original Turbocharger Hose from METZGER producer Original Turbocharger Hose from FEBI BILSTEIN producer Original Turbocharger Hose from ESEN SKV producer
Original Turbocharger Hose from BU producer Original Turbocharger Hose from SWAG producer Original Turbocharger Hose from MEYLE producer Original Turbocharger Hose from SASIC producer Original Turbocharger Hose from BUGIAD producer Original Turbocharger Hose from JP GROUP producer Original Turbocharger Hose from ORIGINAL IMPERIUM producer Original Turbocharger Hose from VAICO producer
Top quality parts Turbocharger Hose for your car
Buy FEBI BILSTEIN Charger Intake Hose 49083 for car at low price £ 10,38
-23%
£ 10,38
£ 13,48
incl. 20% VAT, Shipping
x Charger Intake Hose | FEBI BILSTEIN 49083
Parts Details
  • Inner diameter [mm]: 54,0
  • Weight [kg]: 0,197
In stock Details
Buy SASIC Charger Intake Hose 3336152 for car at low price £ 22,70
-23%
£ 22,70
£ 29,48
incl. 20% VAT, Shipping
x Charger Intake Hose | SASIC 3336152
Parts Details
  • Fitting Position: Intercooler, Outlet
  • for OE number: Part/oe 11617799398
In stock Details
Buy VAICO Holding Clamp, charger air hose V10-4448 for car at low price £ 1,36
-23%
£ 1,36
£ 1,76
incl. 20% VAT, Shipping
x Holding Clamp, charger air hose | VAICO V10-4448
Parts Details
  • Spring clamp diameter [mm]: 66
In stock Details
Article №: 1116000600
Buy JP GROUP Hose, air supply 1116000600 for car at low price £ 20,20
-23%
£ 20,20
£ 26,24
incl. 20% VAT, Shipping
x Hose, air supply | JP GROUP 1116000600
Parts Details
  • Weight [kg]: 0,217
  • Required quantity: 1
In stock Details
Buy FEBI BILSTEIN Holding Clamp, charger air hose 39028 for car at low price £ 3,52
-78%
£ 3,52
£ 15,36
incl. 20% VAT, Shipping
x Holding Clamp, charger air hose | FEBI BILSTEIN 39028
Parts Details
  • Width [mm]: 15,8
  • Clamping range from [mm]: 95
  • Clamping range to [mm]: 117
  • Weight [kg]: 0,110
In stock Details
Buy BUGIAD Charger Intake Hose 88614 for car at low price £ 15,18
-23%
£ 15,18
£ 19,72
incl. 20% VAT, Shipping
x Charger Intake Hose | BUGIAD 88614
Parts Details
  • for OE number: FORD, 1496239
  • Fitting Position: Intercooler, Right
In stock Details
Buy BUGIAD Charger Intake Hose 88751 for car at low price £ 8,84
-23%
£ 8,84
£ 11,48
incl. 20% VAT, Shipping
x Charger Intake Hose | BUGIAD 88751
Parts Details
  • for OE number: 0381.27
  • Fitting Position: Behind exhaust turbo charger
In stock Details
Buy FEBI BILSTEIN Charger Intake Hose 47265 for car at low price £ 15,58
-23%
£ 15,58
£ 20,24
incl. 20% VAT, Shipping
x Charger Intake Hose | FEBI BILSTEIN 47265
Parts Details
  • Length [mm]: 134
  • Weight [kg]: 0,160
  • Inner diameter 1 [mm]: 49
  • Inner diameter 2 [mm]: 49
In stock Details
  • Contacts
  • TOS
  • Privacy Policy
  • Company
  • Payment
  • Shipping
  • Return of goods
  • Replacement