Lambda sensor for RENAULT Clio IV Van 1.5 dCi 90 hp Diesel
Article number:
3922L0467
Details
-
Thread Size:
M18x1,5
-
Oxygen Sensor:
Heated
-
Cable Length [mm]:
280
-
Number of pins:
5
-
Number of circuits:
5
-
Connector Shape:
D Shape
-
Line insulation design:
with silicone-coated woven-fibre insulation
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
3922L0674
Details
-
Thread Size:
M18x1,5
-
Oxygen Sensor:
Heated
-
Cable Length [mm]:
770
-
Number of circuits:
5
-
Supplementary Article / Supplementary Info Info 2:
without plug
-
Connector/Clamp:
Connector may need adjustment
-
Supplementary Article / Supplementary Info:
with fastening/mounting material
-
Line insulation design:
with silicone-coated woven-fibre insulation
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
SKLS-0140627
Details
-
Thread Size:
M18x1,5
-
Oxygen Sensor:
Heated
-
Cable Length [mm]:
280
-
Number of pins:
5
-
Number of circuits:
5
-
Connector Shape:
D Shape
-
Line insulation design:
with silicone-coated woven-fibre insulation
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
ESEN SKV 09SKV201 Lambda sensor before catalytic converter, Regulating Probe, 12V
Details
-
-
Oxygen Sensor:
Diagnostic Probe
-
TecDoc Engine Number:
K9K 608
-
Fitting Position:
after catalytic converter
-
Required quantity:
1
-
Oxygen Sensor:
Regulating Probe
-
Fitting Position:
before catalytic converter
-
Cable Length [mm]:
460
-
Number of pins:
5
-
Weight [kg]:
0,14
-
Voltage [V]:
12
-
Operating Mode:
Electric
-
Always compare old and new part (in particular OE No.)
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
This is a standard picture
Article number:
466016355271
Details
-
-
TecDoc Engine Number:
K9K 608, K9K 628, K9K 629
-
Oxygen Sensor:
Regulating Probe
-
Oxygen Sensor:
Heated
-
Cable Length [mm]:
445
-
Length [mm]:
445
-
Conductor Number:
5
-
Resistor [Ohm]:
4,9
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
WAGNER LBS00023 Lambda sensor without clip, before catalytic converter, M18X1.5mm, Heated, Broadband oxygen sensor, 5, D Shape
Details
-
Thread Size:
M18X1.5mm
-
Oxygen Sensor:
Heated, Broadband oxygen sensor
-
Fitting Position:
before catalytic converter
-
Cable Length [mm]:
315
-
Overall Length [mm]:
480
-
Length [mm]:
452
-
Number of circuits:
5
-
Conductor Number:
5
-
Recommended change interval [km]:
80000
-
Weight [kg]:
0,18
-
Quality:
OE EQUIVALENT
-
Number of connectors:
1
-
Supplementary Article / Supplementary Info Info 2:
without clip
-
Version:
A
-
Housing Colour:
black
-
Connector Shape:
D Shape
-
Material:
Metal
-
Packaging length [cm]:
16
-
Packaging width [cm]:
6,3
-
Packaging height [cm]:
5,6
-
Net weight [kg]:
0,15
-
Number of pins:
6
-
Line insulation design:
with silicone insulation
-
Condition:
New
More +
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
ESL-PL-009
Details
-
-
Fitting Position:
Front
-
Exhaust System:
before catalytic converter
-
Oxygen Sensor:
Regulating Probe, Thread pre-greased
-
Fitting Position:
before catalytic converter
-
Fabrication Number:
ESL-PL-009
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
VEMO V46-76-0023 Lambda sensor Original VEMO Quality, before catalytic converter, M18 x 1,5, M18x1,5, Regulating Probe, Thread pre-greased, black, 5, D Shape
Article number:
V46-76-0023
Details
-
Supplementary Info:
Original VEMO Quality
-
Thread Size:
M18 x 1,5, M18x1,5
-
Oxygen Sensor:
Regulating Probe, Thread pre-greased
-
Fitting Position:
before catalytic converter
-
Length [mm]:
500
-
Number of circuits:
5
-
Connector Shape:
D Shape
-
Socket colour:
black
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
ES21078-12B1
Details
-
-
Oxygen Sensor:
Regulating Probe
-
Fitting Position:
before catalytic converter
-
Oxygen Sensor:
Broadband oxygen sensor, Heated
-
Cable Length [mm]:
445
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
This is a standard picture
Details
-
-
TecDoc Engine Number:
K9K 608
-
Engine Code:
K9K609
-
Oxygen Sensor:
Regulating Probe
-
Fitting Position:
before catalytic converter
-
Length [mm]:
500
-
Number of circuits:
5
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
Oxygen Sensor:
Oxygen Sensor
-
Weight [kg]:
0,14
-
Always compare old and new part (in particular OE No.)
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
Oxygen Sensor:
Oxygen Sensor
-
Number of circuits:
5
-
Weight [kg]:
0,15
-
Voltage [V]:
12
-
Colour:
red
-
Operating Mode:
Electric
-
Always compare old and new part (in particular OE No.)
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
-
Engine Code:
K9K608/K9K609
-
TecDoc Engine Number:
K9K 608, K9K 628
-
Required quantity:
1
-
Fitting Position:
after catalytic converter, before catalytic converter
-
Oxygen Sensor:
Diagnostic Probe, Regulating Probe
-
Oxygen Sensor:
Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased
-
Cable Length [mm]:
450
-
Number of circuits:
5
-
Conductor Number:
5
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
goCORE GCC9220122 Lambda sensor M18x1,5, Heated, 5, D Shape
Article number:
GCC9220122
Details
-
Thread Size:
M18x1,5
-
Oxygen Sensor:
Heated
-
Cable Length [mm]:
280
-
Number of pins:
5
-
Number of circuits:
5
-
Connector Shape:
D Shape
-
Line insulation design:
with silicone-coated woven-fibre insulation
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
goCORE GCC9220162 Lambda sensor with fastening/mounting material, without plug, M18x1,5, Heated, 5
Article number:
GCC9220162
Details
-
Thread Size:
M18x1,5
-
Oxygen Sensor:
Heated
-
Cable Length [mm]:
770
-
Number of circuits:
5
-
Supplementary Article / Supplementary Info Info 2:
without plug
-
Connector/Clamp:
Connector may need adjustment
-
Supplementary Article / Supplementary Info:
with fastening/mounting material
-
Line insulation design:
with silicone-coated woven-fibre insulation
-
Condition:
New
OEM-Number
Free delivery on this item
If a part is temporarily unavailable, you could substitute it with these parts:
Quality Lambda sensor for Renault CLIO 1.5 dCi 90 hp Diesel
Wide selection of new lambda sensor for Clio IV Van 1.5dCi (BHAJ) Diesel 90 hp, priced from £41.24 to £443.96. Choose from 51 trusted manufacturers.
Tried, tested, and top-rated: Lambda sensor for Renault CLIO 4 Kasten 1.5 dCi (BHAJ) 90 hp Diesel
More
Top spare parts this car
More
Top Prices
Onlinecarparts.co.uk guarantees high-quality car parts at very attractive prices.
Shipping costs
Free shipping within the UK on purchases of over £140 except when ordering bulky items, core parts, or tyres.
Our payment methods
We accept PayPal, Visa, Discover, American Express, and bank transfer.
Wide choice
Our product range currently includes over 2,500,000 car parts.