Lambda sensor for Fiat Scudo 220L Van 1.6 79 hp Petrol
Article number:
3922L0137
Details
-
Thread Size:
M18x1,5
-
Oxygen Sensor:
Heated
-
Cable Length [mm]:
1170
-
Number of circuits:
4
-
Number of connectors:
4
-
Connector Shape:
rectangular
-
Line insulation design:
with silicone-coated woven-fibre insulation
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
3922L0226
Details
-
-
Construction Year to:
05/2000
-
Oxygen Sensor:
Regulating Probe
-
Exhaust System:
before catalytic converter
-
Thread Size:
M18x1,5
-
Oxygen Sensor:
Heated
-
Cable Length [mm]:
570
-
Number of circuits:
4
-
Supplementary Article / Supplementary Info Info 2:
without plug
-
Connector/Clamp:
Connector may need adjustment
-
Supplementary Article / Supplementary Info:
with squeeze connector, with cable tie
-
Line insulation design:
with silicone-coated woven-fibre insulation
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
3922L0034
Details
-
Thread Size:
M18x1,5
-
Oxygen Sensor:
Heated
-
Cable Length [mm]:
1400
-
Number of pins:
4
-
Number of connectors:
4
-
Connector Shape:
rectangular
-
TecDoc Engine Number:
220 A 2.000
-
Line insulation design:
with silicone-coated woven-fibre insulation
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
STARK SKLS-0140228 Lambda sensor M18x1,5, Heated, 4, rectangular
Article number:
SKLS-0140228
Details
-
Thread Size:
M18x1,5
-
Oxygen Sensor:
Heated
-
Cable Length [mm]:
1150
-
Number of circuits:
4
-
Number of connectors:
4
-
Connector Shape:
rectangular
-
Line insulation design:
with silicone-coated woven-fibre insulation
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
ESL-AU-007
Details
-
-
Fitting Position:
Front
-
Oxygen Sensor:
Regulating Probe
-
Exhaust System:
before catalytic converter
-
Oxygen Sensor:
Diagnostic Probe, Thread pre-greased
-
Fitting Position:
after catalytic converter
-
Fabrication Number:
ESL-AU-007
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
ABAKUS 120-08-233 Lambda sensor M18x1,5, Oxygen Sensor, Heated, 4
Article number:
120-08-233
Details
-
-
Construction Year to:
05/2000
-
Connector/Clamp:
Connector may need adjustment
-
Thread Size:
M18x1,5
-
Oxygen Sensor:
Oxygen Sensor, Heated
-
Number of circuits:
4
-
Spanner Size:
22
-
Assy./disassy. by qualified personnel required!
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
ESL-AU-005
Details
-
-
Fitting Position:
Front
-
Oxygen Sensor:
Regulating Probe
-
Exhaust System:
before catalytic converter
-
Oxygen Sensor:
Regulating Probe, Thread pre-greased
-
Fitting Position:
before catalytic converter
-
Overall Length [mm]:
1010
-
Number of circuits:
4
-
Fabrication Number:
ESL-AU-005
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
ESL-BM-007
Details
-
-
Fitting Position:
Front
-
Oxygen Sensor:
Regulating Probe
-
Exhaust System:
before catalytic converter
-
Oxygen Sensor:
Regulating Probe, Thread pre-greased
-
Fitting Position:
before catalytic converter
-
Overall Length [mm]:
360
-
Number of circuits:
4
-
Fabrication Number:
ESL-BM-007
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
ESL-CH-004
Details
-
-
Fitting Position:
Front
-
Oxygen Sensor:
Regulating Probe
-
Exhaust System:
before catalytic converter
-
Oxygen Sensor:
Heated, Thread pre-greased
-
Cable Length [mm]:
400
-
Number of circuits:
4
-
Operating Mode:
Electric
-
Fabrication Number:
ESL-CH-004
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
ESL-PL-007
Details
-
-
Fitting Position:
Front
-
Exhaust System:
before catalytic converter
-
Oxygen Sensor:
Regulating Probe, Thread pre-greased
-
Fitting Position:
before catalytic converter
-
Fabrication Number:
ESL-PL-007
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
SKLS-0140083
Details
-
-
Construction Year to:
05/2000
-
Oxygen Sensor:
Regulating Probe
-
Exhaust System:
before catalytic converter
-
Thread Size:
M18x1,5
-
Oxygen Sensor:
Heated
-
Cable Length [mm]:
570
-
Number of circuits:
4
-
Supplementary Article / Supplementary Info Info 2:
without plug
-
Connector/Clamp:
Connector may need adjustment
-
Supplementary Article / Supplementary Info:
with squeeze connector, with cable tie
-
Line insulation design:
with silicone-coated woven-fibre insulation
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
3922L0226P
Details
-
-
Construction Year to:
05/2000
-
Oxygen Sensor:
Regulating Probe
-
Exhaust System:
before catalytic converter
-
Thread Size:
M18x1,5
-
Oxygen Sensor:
Heated
-
Cable Length [mm]:
570
-
Number of circuits:
4
-
Supplementary Article / Supplementary Info Info 2:
without plug
-
Connector/Clamp:
Connector may need adjustment
-
Supplementary Article / Supplementary Info:
with squeeze connector, with cable tie
-
Line insulation design:
with silicone-coated woven-fibre insulation
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
3922L0034P
Details
-
Thread Size:
M18x1,5
-
Oxygen Sensor:
Heated
-
Cable Length [mm]:
1385
-
Number of pins:
4
-
Number of connectors:
4
-
Connector Shape:
rectangular
-
TecDoc Engine Number:
220 A 2.000
-
Line insulation design:
with silicone-coated woven-fibre insulation
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
goCORE GCC9220144 Lambda sensor with squeeze connector, with cable tie, without plug, before catalytic converter, M18x1,5, Heated, 4
Article number:
GCC9220144
Details
-
-
Construction Year to:
05/2000
-
Oxygen Sensor:
Regulating Probe
-
Exhaust System:
before catalytic converter
-
Thread Size:
M18x1,5
-
Oxygen Sensor:
Heated
-
Cable Length [mm]:
570
-
Number of circuits:
4
-
Supplementary Article / Supplementary Info Info 2:
without plug
-
Connector/Clamp:
Connector may need adjustment
-
Supplementary Article / Supplementary Info:
with squeeze connector, with cable tie
-
Line insulation design:
with silicone-coated woven-fibre insulation
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
goCORE GCC9220159 Lambda sensor M18x1,5, Heated, rectangular
Article number:
GCC9220159
Details
-
Thread Size:
M18x1,5
-
Oxygen Sensor:
Heated
-
Cable Length [mm]:
1100
-
Number of pins:
4
-
Conductor Number:
4
-
Connector Shape:
rectangular
-
Line insulation design:
with silicone-coated woven-fibre insulation
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Quality Lambda sensor for Fiat SCUDO 1.6 79 hp Petrol
Wide selection of new lambda sensor for Fiat Scudo 220L Van 1.6 Petrol 79 hp, priced from £18.07 to £72.35. Choose from 67 trusted manufacturers.
Tried, tested, and top-rated: Lambda sensor for Fiat Scudo Van (220_) 1.6 79 hp Petrol
More
Top spare parts this car
More
Top Prices
Onlinecarparts.co.uk guarantees high-quality car parts at very attractive prices.
Shipping costs
Free shipping within the UK on purchases of over £140 except when ordering bulky items, core parts, or tyres.
Our payment methods
We accept PayPal, Visa, Discover, American Express, and bank transfer.
Wide choice
Our product range currently includes over 2,500,000 car parts.