BEEPER RW4QUAD Reversing camera with LED, with camera

This complete kit contains :

- 7 inch LED screen
- Adjustable support (with its adhesive of fixing)
- 3 white micro cameras 4 IR LEDs with night vision
- Shielded cable 15 meters, 4-pin connector
- 3 shielded cables of 5 meters
- 1 rear camera on bracket 178 IR LEDs with night vision
- 1 Steel bracket
- 1 Plastic cap
One QUAD screen to view 4 cameras

The Beeper RW4QUAD screen will allow you to view up to 4 cameras at the same time. One rear view camera and 3 small side view cameras.

Installation of the screen

Camera installation

Backup video viewing:
When using in reverse video, be sure to connect your product to a +12/24V reverse light. In this case, the product will automatically activate when the car is in reverse gear.

Vision in retrovision:
When using in surveillance, be sure to connect your product to a +12/24V after contact. In this case, the product will be activated as soon as the vehicle is switched on.

Optimal vision, even at night
The cameras in the Beeper RW4QUAD kit are equipped with 18 infrared LEDs on the back and 4 infrared LEDs on the sides, which have the particularity of detecting the level of light, thus providing the best possible night vision.

Please note that the operation of the LEDs is not perceptible to the naked eye.

These LEDs are a real asset for night vision, however they can sometimes distort the real colors of surrounding objects or obstacles (eg: pink vegetation). However, this constraint remains negligible compared to the overall performance of the product.

Template lines

Distance display template lines appear on the screen. These lines allow to evaluate the distances between the vehicle and the obstacle. These template lines can be deactivated during the installation of the product if you wish.

Dimensions

WARNING - VEHICLES THAT DO NOT ALLOW A CONSUMER TO BE CONNECTED TO THE REVERSE LIGHT HARNESS
On some vehicles, the +12 V Backup Light is interfered with when the engine is running, which can interfere with the proper operation of the Backup Camera Kit. In other cases, this +12 V Backup Light does not allow any additional power consumption.
For all these vehicles, Beeper has developed the RCANR2 module to retrieve the +12V Backup Light information from the CANBUS network. This module connects to the CANBUS of the compatible vehicle and delivers a +12V Backup Light for the connection of a backup camera.
You will find this module canbus RCANR2
The Beeper RW4QUAD is of course a complete kit, delivered with all the necessary accessories for the assembly, as well as a simple and clear user manual.