BEEPER RVU-7W Reversing camera

The RVU-7W kit is specially designed for commercial vehicles. Its 7'' LED rear view mirror and its flexible micro-camera with integrated LEDs, make it a complete and efficient kit for your vehicle.

Main Features
RVU-7W is a rear view video kit for commercial vehicles (vans, light trucks)

- When the vehicle is reversed, the reversing video system is automatically activated.
- The screen allows you to visualize the rear blind spot so that you can perform your reverse maneuver in complete safety.
- As soon as you stop reversing, the system is inactive.
- Different colored template lines allow you to visualize the distances during a maneuver.
- The kit has 2 video inputs, so you can add a second camera.
- The kit can be coupled with a reversing radar, for an optimal safety (ref. RVU-RR1)

Composition of the kit

A. Flexible camera (x1)
B. Adhesive of fixing for flexible camera (x1)
C. 7'' LED mirror screen (x1)
D. RCA connector (x1)
E. 12 m. cable extension for rear view video (x1)
F. Optional JACK connector (for connecting a 2nd camera) (x1)
G. Tube of sealing compound (x1)

Activating and deactivating the system
The system is automatically activated when the vehicle is shifted into reverse. It automatically deactivates when the vehicle is shifted into another gear or into neutral.

Installation of the display in the passenger compartment

The screen of the BEEPER RVU-7R1W is easily fixed on your original interior mirror, thanks to its 4 extensible legs.

Dimensions

The dimensions of the 7'' LED screen are 240 x 108 x 19 mm (diagonal of the screen: 17.4 cm)

The dimensions of the flexible micro-camera are: 48 x 31 x 18 mm

Function of the screen
The 7'' screen of the BEEPER RVU-5W kit has several adjustable functions (brightness, contrast, etc.). The adjustment is made using the +, MENU, - buttons, located on the back of the screen (see diagram below).

1. ON/OFF of the screen
2. Rotate the image
3. Menu navigation (right)
4. Menu navigation (left)
5. Menu navigation (bottom)
6. MENU
7. Menu navigation (top)

Distance display templates

WHITE loop = distance display templates

WHITE loop closed = VISIBLE templates (original selection)
White loop open (cut) = templates NOT VISIBLE

/! The selection of this option is made with the camera not powered.

Note: The original selection is made for a camera positioned "horizontally", a screen fixed or glued from above & in reverse camera version (visible templates). To change the state of the loop, please disconnect the camera first, then reconnect it after the operation.

Installation of the camera on the vehicle

The adjustable angle of the camera allows you to position it in two different places on the vehicle, according to your choice or a technical constraint: on the top of the body (at the level of the upper brake light, see diagram A below) or on the bottom of the body (at the level of the plate light, see diagram B below).

/! If the camera is installed vertically, be sure to fill the hole at the top with the adhesive provided, to reinforce the seal and prevent water from entering the vehicle by capillary action.

WARNING - VEHICLES THAT DO NOT ALLOW A CONSUMER TO BE CONNECTED TO THE REVERSE LIGHT HARNESS
On some vehicles, the +12 V reversing light is interfered with when the engine is running, which can disrupt the correct operation of the reversing camera kit. In other cases, this +12 V Backup Light does not allow any additional power consumption.
For all these vehicles, Beeper has developed the RCANR2 module to retrieve the +12V Backup Light information from the CANBUS network. This module connects to the CANBUS of the compatible vehicle and delivers a +12V Backup Light for the connection of a backup camera.
You will find this module canbus RCANR2

The BEEPER RVU-7W is of course a complete kit, delivered with all the accessories necessary for the assembly, as well as a simple and clear instruction manual.