Car shock absorber dust cover & bump stops

Everybody knows that protection is very important for the vehicle. It may be car insurance (antitheft protection, for instance) or drive and passenger protection (airbags). Dust protection set serves to protect Bump stops & Shock absorber dust covers from early wear, pitchy mud, dust or water. Usually it is made of rubber to provide an ideal flexibility and the best corrosion protection. Dust protection set is attached to each of four car shock absorbers. The faultless state of the dust protection set is as important as a faultlessly running Suspension bump stops & Shock absorber dust cover. It is rather difficult to detect a faulty dust protection set, not as easy as a broken light. That is why it is important always to check the dust protection set and to remove contaminations. This guarantees a long life of this important car part.

When replacing the shock absorber, it is also necessary to replace the dust protection set to prevent damages. Proper installation is as important as the correct assembly of the Shock absorber dust cover kit. Many reputable car parts makers offer products of different price category.

In our online shop you will find appropriate car parts for your model type. Enter your registration number and you will quickly find the car part you need. If you need any help, do not hesitate to contact us. Service is very important for us, so you can be sure that youк order will be shipped as quickly as possible. Engine spare car parts, such as engine radiator and engine bearings, are also usually in stock. You will be able quickly to repair even a faulty ignition system, because in our Internet store you will find appropriate ignition modules and ignition cable sets for your system.

How to detect malfunction of the shock absorber dust cover kit

To check the state of the Bump stops & Shock absorber dust cover kit, it should be inspected. Special attention should be paid to the fasteners, as well as checking the dust boot for surface defects.

If the defective parts have not been replaced in time, serviceability of the shock absorbers and the struts may be compromised.

The Shock absorber dust cover kit kits should be replaced after every 20-30 thousand km of mileage (once in one or two years). To make shock absorbers function correctly, the dust boots should be inspected every three months.

You may notice that Dust cover kit shock absorber kit is to be replaced by the following symptoms:

• the shock absorber creaks and knocks when driving;
• the vehicle swings excessively when moving faster than 80 km/h;
• wear of the components is visible.

Reasons of malfunction of the shock absorber dust cover kit

The most common cause of Shock absorber dust cover & Suspension bump stops kit damage is the influence of aggressive external factors. Due to temperature changes, contact of fine solid fractions with the rubber surface, water, dirt, cracks and breaks occur.

Due to the intense vibrations that occur when driving off-road, the dust boot may jump off the castellated nut. Premature wear of the kit may be caused by poor quality of its components, and improper installation.

Replacing theProtective cap bellow shock absorber kit

Faulty components are not repaired. To replace a faulty shock absorber dust cover kit, the first step is dismantling the assembly of the shock absorber, the dust boot and the bump stop. Next, the dust boot is extracted from the groove and removed from the castellated nut. Next, dirt is to be removed and a new dust boot installed, followed by assembly of the unit.