Clutch kit 06A 105 264 M S3 
            
    
    
    
            
            
                
        
        
            
            
                
                
                                            
                            Article number:
                            ADV183039 
                        
                                                                        
                                     
             
            
                
                                    
                        Details                    
                    
                        
    
        
            
                Diameter [mm]:
                             
            227 
         
                
            
                Number of Teeth:
                             
            28 
         
                
            
                Supplementary Article / Supplementary Info:
                             
            with synthetic grease 
         
                
            
                Supplementary Article / Supplementary Info Info 2:
                             
            with clutch release bearing, with flywheel, with bolts/screws 
         
                
            
                Multi-piece:
                             
            four-piece 
         
                
            
                Clutch:
                             
            Conversion from dual-mass flywheel to single-mass flywheel 
         
                
            
                Observe service information
                             
             
         
                
            
                Condition:
                             
            New 
         
         
     
                        
     The set contains the following items:
    
        
                    1 x Clutch Pressure Plate
                (Article number: ADBP320031)
     
    
                    1 x Grease
                (Article number: ADBP550001)
     
     
     
                        
    ОЕ number 
    
     
                        
                        
                                             
                
             
            
                
                    
                                    
                
        -60%
        
            compared to RRP: 
            £504,99 
        
        
             
        
     
                
         
        Free delivery on this item 
     
                
                
                
                
                
                
                
                             
         
     
    
        
            If a part is temporarily unavailable, you could substitute it with these parts: 
         
        
     
             
            
         
    
            
            Top products at reduced prices 
         
        
    
                    
                
                    
                        
                             
                            Parts Details 
                         
                        
                            
                                
            
                Product line:
                             
            RepSet DMF 
         
                
            
                Supplementary Article / Supplementary Info:
                             
            with central slave cylinder 
         
                
            
                Supplementary Article / Supplementary Info Info 2:
                             
            with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate 
         
                
            
                Transmission Type:
                             
            not for semi-automatic 
         
                
            
                Adjustment:
                             
            with automatic adjustment 
         
                
            
                Number of teeth (finding the max. clearance angle):
                             
            7 
         
                
            
                max. side clearance [mm]:
                             
            2,9 
         
                
            
                Max. Clearance Angle [Degree]:
                             
            19 
         
                
            
                Number of mounting bores:
                             
            8 
         
                
            
                Condition:
                             
            New 
         
                                 
                         
                        
                            In stock
                        
                        Details
                     
                    
                                            
                    
                         
                                         
                    
                    
                    
                    
                    
                                            
                    
                 
                
                                    
                        
                            
                                 
                             
                         
                        
                             
                         
                    
                             
                    
                
                    
                        
                             
                            Parts Details 
                         
                        
                            
                                
            
                Supplementary Article / Supplementary Info:
                             
            with central slave cylinder 
         
                
            
                Supplementary Article / Supplementary Info Info 2:
                             
            with flywheel, with screw set 
         
                
            
                Transmission Type:
                             
            not for semi-automatic 
         
                
            
                Adjustment:
                             
            with automatic adjustment 
         
                
            
                Number of mounting bores:
                             
            8 
         
                
            
                Condition:
                             
            New 
         
                                 
                         
                        
                            In stock
                        
                        Details
                     
                    
                                            
                    
                         
                                         
                    
                    
                    
                    
                    
                                            
                    
                 
                
                                    
                        
                            
                                 
                             
                         
                        
                             
                         
                    
                             
                    
                
                    
                        
                             
                            Parts Details 
                         
                        
                            
                                
            
                Number of Teeth:
                             
            21 
         
                
            
                Supplementary Article / Supplementary Info:
                             
            with single-mass flywheel, with central slave cylinder 
         
                
            
                New Part
                             
             
         
                
            
                Weight [kg]:
                             
            27,581 
         
                
            
                Clutch:
                             
            Conversion from dual-mass flywheel to single-mass flywheel 
         
                
            
                Tightening Torque [Nm]:
                             
            30 
         
                
            
                Tightening angle [degrees]:
                             
            90 
         
                
            
                Clutch Pressure Plate Outer Diameter [mm]:
                             
            250 
         
                
            
                Condition:
                             
            New 
         
                                 
                         
                        
                            In stock
                        
                        Details
                     
                    
                                            
                    
                         
                                         
                    
                    
                    
                    
                    
                                            
                    
                 
                
                                    
                        
                            
                                 
                             
                         
                        
                             
                         
                    
                             
                    
                
                    
                        
                             
                            Parts Details 
                         
                        
                            
                                
            
                Diameter [mm]:
                             
            260 
         
                
            
                Number of Teeth:
                             
            21 
         
                
            
                Product line:
                             
            XTend Kit plus CSC 
         
                
            
                Hub Profile:
                             
            21,27x24,55-22N 
         
                
            
                Alternative Repair Kit:
                             
            3000 950 707 
         
                
            
                Number of mounting bores at central slave cylinder:
                             
            2 
         
                
            
                only available in set
                             
             
         
                
            
                Condition:
                             
            New 
         
                                 
                         
                        
                            In stock
                        
                        Details
                     
                    
                                            
                    
                         
                                         
                    
        -49%
        
            compared to RRP: 
            £554,32 
        
        
             
        
     
                    
                    
                    
                    
                                            
                    
                 
                
                                    
                        
                            
                                 
                             
                         
                        
                             
                         
                    
                             
                    
                
                    
                        
                             
                            Parts Details 
                         
                        
                            
                                
            
                Number of Teeth:
                             
            21 
         
                
            
                Supplementary Article / Supplementary Info:
                             
            without central slave cylinder 
         
                
            
                Supplementary Article / Supplementary Info Info 2:
                             
            with flywheel, with screw set 
         
                
            
                Hub Profile:
                             
            21.3x24.3 
         
                
            
                Multi-piece:
                             
            three-piece 
         
                
            
                Clutch:
                             
            Conversion from dual-mass flywheel to single-mass flywheel 
         
                
            
                Clutch Pressure Plate Outer Diameter [mm]:
                             
            250 
         
                
            
                Friction Lining Outer Diameter 1 [mm]:
                             
            250 
         
                
            
                Condition:
                             
            New 
         
                                 
                         
                        
                            In stock
                        
                        Details
                     
                    
                                            
                    
                         
                                         
                    
                    
                    
                    
                    
                                            
                    
                 
                
                                    
                        
                            
                                 
                             
                         
                        
                             
                         
                    
                             
                    
                
                    
                        
                             
                            Parts Details 
                         
                        
                            
                                
            
                Diameter [mm]:
                             
            260 
         
                
            
                Number of Teeth:
                             
            21 
         
                
            
                Supplementary Article / Supplementary Info:
                             
            with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws 
         
                
            
                Supplementary Article / Supplementary Info Info 2:
                             
            with clutch disc 
         
                
            
                Mounting Type:
                             
            not pre-mounted 
         
                
            
                Number of mounting bores at central slave cylinder:
                             
            2 
         
                
            
                Condition:
                             
            New 
         
                                 
                         
                        
                            In stock
                        
                        Details
                     
                    
                                            
                    
                         
                                         
                    
        -35%
        
            compared to RRP: 
            £993,47 
        
        
             
        
     
                    
                    
                    
                    
                                            
                    
                 
                
                                    
                        
                            
                                 
                             
                         
                        
                             
                         
                    
                             
                    
                
                    
                        
                             
                            Parts Details 
                         
                        
                            
                                
            
                Diameter [mm]:
                             
            262 
         
                
            
                Number of Teeth:
                             
            21 
         
                
            
                Supplementary Article / Supplementary Info:
                             
            with central slave cylinder, with synthetic grease 
         
                
            
                Multi-piece:
                             
            three-piece 
         
                
            
                Observe service information
                             
             
         
                
            
                Condition:
                             
            New 
         
                                 
                         
                        
                            In stock
                        
                        Details
                     
                    
                                            
                    
                         
                                         
                    
        -60%
        
            compared to RRP: 
            £449,99 
        
        
             
        
     
                    
                    
                    
                    
                                            
                    
                 
                
                                    
                        
                            
                                 
                             
                         
                        
                             
                         
                    
                             
                    
                
                    
                        
                             
                            Parts Details 
                         
                        
                            
                                
            
                Diameter [mm]:
                             
            260 
         
                
            
                Number of Teeth:
                             
            21 
         
                
            
                Product line:
                             
            XTend 
         
                
            
                Supplementary Article / Supplementary Info Info 2:
                             
            without clutch release bearing 
         
                
            
                Hub Profile:
                             
            21,27x24,55-22N 
         
                
            
                Observe service information
                             
             
         
                
            
                only available in set
                             
             
         
                
            
                Condition:
                             
            New 
         
                                 
                         
                        
                            In stock
                        
                        Details
                     
                    
                                            
                    
                         
                                         
                    
        -54%
        
            compared to RRP: 
            £404,83 
        
        
             
        
     
                    
                    
                    
                    
                                            
                    
                 
                
                                    
                        
                            
                                 
                             
                         
                        
                             
                         
                    
                             
                    
                
                    
                        
                             
                            Parts Details 
                         
                        
                            
                                
            
                Diameter [mm]:
                             
            260 
         
                
            
                Number of Teeth:
                             
            21 
         
                
            
                Supplementary Article / Supplementary Info:
                             
            with clutch pressure plate, with central slave cylinder, with dual-mass flywheel, with flywheel screws 
         
                
            
                Supplementary Article / Supplementary Info Info 2:
                             
            with clutch disc 
         
                
            
                Mounting Type:
                             
            not pre-mounted 
         
                
            
                Number of mounting bores at central slave cylinder:
                             
            2 
         
                
            
                Condition:
                             
            New 
         
                                 
                         
                        
                            In stock
                        
                        Details
                     
                    
                                            
                    
                         
                                         
                        
                            SACHS Clutch kit                                                 
                                                            Article number: 2290 601 207
                                                    
                     
                    
                    
                    
                    
                    
                                            
                    
                 
                
                                    
                        
                            
                                 
                             
                         
                        
                             
                         
                    
                             
                    
                
                    
                        
                             
                            Parts Details 
                         
                        
                        
                            In stock
                        
                        Details
                     
                    
                                            
                    
                         
                                         
                        
                            AISIN Clutch kit                                                 
                                                            Article number: SCKN-224R
                                                    
                     
                    
                    
                    
                    
                    
                                            
                    
                 
                
                                    
                        
                            
                                 
                             
                         
                        
                             
                         
                    
                             
             
    
 
    
        
    
    Choose corresponding Clutch kit for popular car brands
    
 
    
    
    
        
            
                
                    
                         
                     Top Prices 
                
                Onlinecarparts.co.uk guarantees high-quality car parts at very attractive prices.
             
         
        
            
                
                    
                         
                     Shipping costs 
                
                Free shipping within the UK on purchases of over £140 except when ordering bulky items, core parts, or tyres.
             
         
        
            
                
                    
                         
                     Our payment methods 
                
                We accept PayPal, Visa, Discover, American Express, and bank transfer.
             
         
        
            
                
                    
                         
                     Wide choice 
                
                Our product range currently includes over 2,500,000 car parts.