Cv joint for Opel Senator B 3.0 i Cat 177 hp Petrol
Article number:
302009100033
Details
-
Fitting Position:
Front Axle
-
Length [mm]:
32
-
Transmission Type:
Manual Transmission
-
Internal Toothing differential side, conn. to transmission:
28
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
This is a standard picture
Details
-
-
Transmission Type:
Manual Transmission, Automatic Transmission
-
Fitting Position:
transmission sided, Rear Axle
-
for article number:
KOP803
-
Diameter [mm]:
108
-
Internal Toothing differential side, conn. to conn. shaft:
28
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
771 0298 30
Details
-
Fitting Position:
Rear Axle, Wheel Side
-
Length [mm]:
32
-
Joint Type:
CV Joint
-
Diameter [mm]:
108
-
Internal Toothing differential side, conn. to conn. shaft:
28
-
Bellows Material:
NBR (nitrile butadiene rubber)
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
Length [mm]:
32
-
Internal Toothing differential side, conn. to transmission:
28
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
-
Transmission Type:
Manual Transmission, automatically operated
-
Braking/Drive Dynamics:
for vehicles without ABS
-
Fitting Position:
Front Axle, transmission sided
-
Internal Toothing wheel side:
28
-
Diameter [mm]:
108
-
Bellows Material:
Rubber
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
-
Fitting Position:
Rear Axle Left, Rear Axle Right
-
Transmission Type:
Manual Transmission, Automatic Transmission
-
Fitting Position:
Wheel Side
-
Length [mm]:
32
-
Joint Diameter [mm]:
108
-
Internal Toothing differential side, conn. to conn. shaft:
28
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
VKJA 8609
Details
-
Fitting Position:
transmission sided, Rear Axle
-
Length [mm]:
32
-
Joint Type:
Flexible Joint Disc
-
Machined:
with groove in inner part (inside)
-
Diameter [mm]:
108
-
Internal Toothing differential side, conn. to conn. shaft:
28
-
Bolt Hole Circle Ø [mm]:
94
-
Bore Diameter [mm]:
10,2
-
Number of bores:
6
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
-
Fitting Position:
Wheel Side, Rear Axle Left, Rear Axle Right
-
Transmission Type:
Manual Transmission, Automatic Transmission
-
Length [mm]:
32
-
Joint Type:
Flexible Joint Disc
-
Machined:
without groove in internal component
-
Joint Diameter [mm]:
108
-
Supplementary Article / Supplementary Info Info 2:
with cap
-
Internal Toothing differential side, conn. to conn. shaft:
28
-
Bolt Hole Circle Ø [mm]:
94
-
Bore Diameter [mm]:
10,20
-
Number of bores:
6
-
New Part
-
Supplementary Article / Supplementary Info:
with grease
-
Bellows Material:
NBR (nitrile butadiene rubber)
-
Condition:
New
More +
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
Fitting Position:
transmission sided
-
Joint Type:
CV Joint
-
Diameter [mm]:
108
-
Internal Toothing differential side, conn. to transmission:
28
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
2810-1016
Details
-
Fitting Position:
transmission sided, Front Axle
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
NPZ-PL-016
Details
-
Fitting Position:
transmission sided
-
Fabrication Number:
NPZ-PL-016
-
Number of Teeth 1:
28
-
Gross Weight [kg]:
2,205
-
Condition:
New
If a part is temporarily unavailable, you could substitute it with these parts:
PASCAL G7X016PC Joint kit, drive shaft Manual Transmission, Fully Automatic, transmission sided
Details
-
-
Fitting Position:
Wheel Side
-
Transmission Type:
Manual Transmission, Fully Automatic
-
Fitting Position:
transmission sided
-
Internal Toothing differential side, conn. to conn. shaft:
28
-
Condition:
New
If a part is temporarily unavailable, you could substitute it with these parts:
HART 442 488 Joint kit, drive shaft Manual Transmission, automatically operated, Rear Axle Left, Rear Axle Right, transmission sided
Details
-
-
Transmission Type:
Manual Transmission, automatically operated
-
Fitting Position:
Rear Axle Left, Rear Axle Right, transmission sided
-
Length [mm]:
32
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
Fitting Position:
Wheel Side
-
Internal Toothing wheel side:
28
-
Sealing Ring Diameter [mm]:
108
-
Diameter [mm]:
108
-
Condition:
New
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
Fitting Position:
transmission sided
-
Joint Type:
Universal Joint
-
Internal Toothing differential side, conn. to conn. shaft:
28
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Quality Cv joint for Opel SENATOR 3.0 i Cat 177 hp Petrol
Wide selection of new cv joint for Opel Senator B 3.0i Cat (P19) Petrol 177 hp, priced from £18.48 to £107.96. Choose from 24 trusted manufacturers.
Tried, tested, and top-rated: Cv joint for Opel Senator B (V88) 3.0 i Cat (P19) 177 hp Petrol
More
Joint drive shaft for OPEL SENATOR models
More
Top spare parts this car
More
Top Prices
Onlinecarparts.co.uk guarantees high-quality car parts at very attractive prices.
Shipping costs
Free shipping within the UK on purchases of over £140 except when ordering bulky items, core parts, or tyres.
Our payment methods
We accept PayPal, Visa, Discover, American Express, and bank transfer.
Wide choice
Our product range currently includes over 2,500,000 car parts.