Ball joint for Opel Karl (C16) 1.0 75 hp Petrol
Details
-
Fitting Position:
Front Axle Left, Front Axle Right
-
Weight [kg]:
0,33
-
Supplementary Article / Supplementary Info Info 2:
with bolts/screws
-
Height [mm]:
69
-
Material:
Cast Steel
-
Condition:
New
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
OP-BJ-16904
Details
-
Fitting Position:
Front Axle
-
Cone Size [mm]:
16
-
Length [mm]:
29
-
Height [mm]:
53
-
Mounting Type:
Bolted
-
Packing Type:
Box
-
Packaging length [cm]:
13
-
Packaging width [cm]:
8,5
-
Packaging height [cm]:
6
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
VKDS 315021
Details
-
-
Fitting Position:
Lower, Front axle both sides
-
Required quantity:
2
-
Supplementary Article / Supplementary Info:
with synthetic grease
-
Thread Size 1:
16
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
TRISCAN 8500 24568 Ball Joint outer, Front Axle, Lower
Article number:
8500 24568
Details
-
-
Fitting Position:
outer, Front Axle, Lower
-
for OE number:
352556, 352557
-
Required quantity:
2
-
Mounting Type:
Bolted
-
Number of Holes:
3
-
Condition:
New
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
Fitting Position:
Front Axle
-
Cone Size [mm]:
16
-
only in connection with:
3 x M10
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
Fitting Position:
Front Axle
-
Cone Size [mm]:
16
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
825 0497 10
Details
-
Fitting Position:
Front Axle
-
Mounting Type:
Bolted
-
Bolt Head Diameter [mm]:
16
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
QUINTON HAZELL QSJ3864S Ball Joint Front Axle, Lower, 16mm
Details
-
Fitting Position:
Front Axle, Lower
-
Cone Size [mm]:
16
-
Material:
Steel
-
Number of mounting bores:
3
-
Condition:
New
If a part is temporarily unavailable, you could substitute it with these parts:
This is a standard picture
Details
-
Fitting Position:
Front Axle Left, Front Axle Right
-
Cone Size [mm]:
21
-
Cone Pitch:
1:10
-
Supplementary Article / Supplementary Info:
with accessories
-
Length [mm]:
86, 76,1
-
Thread Size 1:
M18x1,5
-
Thread Size 2:
M14x1,5
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
SPIDAN CHASSIS PARTS 59496 Ball Joint Front Axle, 16mm
Details
-
Fitting Position:
Front Axle
-
Cone Size [mm]:
16
-
only in connection with:
3 x M10
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
Fitting Position:
Front Axle Left, Front Axle Right
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
Fitting Position:
Front Axle Left, Front Axle Right, Lower
-
Supplementary Article / Supplementary Info:
with accessories
-
Required quantity:
2
-
Bore Diameter [mm]:
10,5
-
Control/Trailing Arm Type:
for control arm
-
Bolt Head Diameter [mm]:
16
-
Number of mounting bores:
3
-
Alternative Repair Kit:
G3-1129
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Article number:
93-90311-056
Details
-
Fitting Position:
Front axle both sides, Lower
-
Outer Diameter 2 [mm]:
16
-
Weight [kg]:
0,484
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
CTR CB0167 Ball Joint Front axle both sides, Lower Front Axle, with fastening/mounting material, 70mm
Details
-
Fitting Position:
Front axle both sides, Lower Front Axle
-
Supplementary Article / Supplementary Info:
with fastening/mounting material
-
Height [mm]:
70
-
Mounting Type:
Bolted
-
Number of mounting bores:
3
-
Weight [g]:
350,0
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
This is a standard picture
Details
-
Fitting Position:
Front axle both sides, Front Axle, Lower
-
Supplementary Article / Supplementary Info Info 2:
without bolts, without nut
-
Number of mounting bores:
3
-
Weight [g]:
351
-
Bolt/Nut Version:
without plain washer
-
Packaging height [cm]:
8,7
-
Gross Weight [g]:
401
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Quality Ball joint for Opel KARL 1.0 75 hp Petrol
Wide selection of new ball joint for Opel Karl (C16) 1.0 Petrol 75 hp, priced from £13.24 to £67.48. Choose from 25 trusted manufacturers.
Tried, tested, and top-rated: Ball joint for Opel Karl (C16) 1.0 75 hp Petrol
More
Top spare parts this car
More
Top Prices
Onlinecarparts.co.uk guarantees high-quality car parts at very attractive prices.
Shipping costs
Free shipping within the UK on purchases of over £140 except when ordering bulky items, core parts, or tyres.
Our payment methods
We accept PayPal, Visa, Discover, American Express, and bank transfer.
Wide choice
Our product range currently includes over 2,500,000 car parts.