Back
Country
Back
My vehicles
-
Spare parts for your car
NISSAN NP300 Navara Platform / Chassis (D40) cars: technical specifications, versions and trim levels
Nissan Navara (D40) chassis cabs were produced from 2008 till 2015. The cars could have 2 or 4 doors. There were 2 seats in the former layout, and 4 or 5 – in the latter. At onlinecarparts.co.uk online shop you can buy spare parts for Nissan Navara (D40) chassis cab which are suitable by all technical specifications. Specialists of our online support service will gladly help you to choose the required items, and tell you about current promotions so that you can save money. Here you can buy high-quality brake pads, spark plugs, air filters and other components and get the best deal.
Technical specifications of Nissan Navara (D40) chassis
Depending on the cabin type, the body length varied within the 5,220–5,573 mm range, the height – within 1,745–1,877 mm. The width was 1,850 mm. The road clearance was 228–230 mm, and the maximum loading capacity was about 3,000 kg.
The front suspension of the vehicle was independent, the rear one – with leaf springs. The front axle was equipped with ventilated brake discs, the rear one – with drum braking mechanisms.
Main versions
The manufacturer presented more than 10 versions. Both petrol and diesel AWD cars were offered.
The 3.0 dCi AT version was one of the most powerful. It was equipped with a V-type 6-cylinder diesel power unit with a turbocharger and a direct fuel injection system. The engine output was 231 hp, the maximum torque – 550 Nm at 1,750 rpm. The car consumed 12.3 litres per 100 km in urban cycle, 7.6 litres - in extra-urban cycle. Fuel consumption in combined cycle was 9.3 litres. The top speed was 195 km/h. The car accelerated to 100 km/h in 9.3 seconds.
Trim levels of Navara (D40) chassis cab
All vehicles were equipped with an ABS, a traction control system, and hydraulic power steering. Offered optionally were: an audio system, power mirrors, and the central lock.