Ball joint for MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5 76 hp Petrol
Details
Fitting Position:
Lower Left, Lower Right
Cone Size [mm]:
15
Cone Pitch:
1/8
Thread Size:
R-M12×1,25
Weight [kg]:
0,33
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
Fitting Position:
Lower Left, Lower Right
Cone Size [mm]:
15
Cone Pitch:
1/8
Thread Size:
R-M12×1,25
Weight [kg]:
0,33
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
Fitting Position:
Lower, Front Axle Right, Front Axle Left
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
Fitting Position:
Front Axle, Lower
Cone Size [mm]:
15
Thread Size:
M12x1,25
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
Fitting Position:
Front Axle
Weight [kg]:
0,316
Thread Size 1:
M12x1,25
Height [mm]:
48
Material:
Steel
Width [mm]:
48
max. length [mm]:
82
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
This is a standard picture
Details
Fitting Position:
Front Axle
Cone Size [mm]:
15.04
Diameter [mm]:
40.3
Supplementary Article / Supplementary Info Info 2:
Requires special tools for mounting
External Thread Size:
M12x1.25
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
Fitting Position:
outer, Lower Front Axle
Cone Size [mm]:
15
Diameter [mm]:
39,8
Thread Size 1:
MM12x1,5R
Supplementary Article / Supplementary Info Info 2:
Requires special tools for mounting
only in connection with:
Circlip
Observe service information
Article number of the recommended special tool:
R10080
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
Fitting Position:
Upper, Left, Right
Cone Pitch:
1/8
Thread Size:
R-M10×1,25
Weight [kg]:
0,19
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
VAICO V52-0094 Ball Joint Lower, Front Axle Left, Front Axle Right, Original VAICO Quality, M12 x 1,25mm
Details
Supplementary Info:
Original VAICO Quality
Fitting Position:
Lower, Front Axle Left, Front Axle Right
External Thread [mm]:
M12 x 1,25
Weight [kg]:
0,3225
Packaging height [cm]:
6
Packaging Depth [cm]:
10
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
Fitting Position:
Lower Left, Lower Right
Cone Size [mm]:
17
Cone Pitch:
1/8
Thread Size:
R-M12×1,25
Weight [kg]:
0,3
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
SAKURA S4224200 Ball Joint Front Axle Left, Lower, 40mm, 83mm
Details
Fitting Position:
Front Axle Left, Lower
Thread Size:
M12x1.25
Diameter [mm]:
40
Height [mm]:
83
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
HART 420 464 Ball Joint Front Axle, 15mm
Details
Fitting Position:
Front Axle
Cone Size [mm]:
15
Thread Size 1:
MM12x1,5R
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
Fitting Position:
Front Axle
Weight [kg]:
0,31
Thread Size 1:
M12x1,25
Height [mm]:
46
Material:
Steel
Width [mm]:
46
max. length [mm]:
84
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
This is a standard picture
CTR CBM-11 Ball Joint outer, Left, Right, Front Axle, Lower, with nut, without nut, without bolts, without pressure pin, 46mm, 46mm, 61.5mm, 1/8
Details
Fitting Position:
outer, Left, Right, Front Axle, Lower
Cone Pitch:
1/8
Thread Size:
M12XP1.25, M12xP1.25
Supplementary Article / Supplementary Info:
without pressure pin
Diameter [mm]:
46
Length [mm]:
46
Weight [kg]:
0.3
for OE number:
MB518960, MB518713, MB518712, MB518206, MB518205, MB518042, MB518041, MB430351, MB430350, MB369963, MB349964
Supplementary Article / Supplementary Info Info 2:
with nut, without nut, without bolts
Height [mm]:
61.5
Material:
Polychloroprene (Neoprene)
Weight [g]:
322
Bolt/Nut Version:
without plain washer
Gross Weight [g]:
360
Machined:
without dowel hole
Condition:
New
More +
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
Fitting Position:
Lower Left, Lower Right
Cone Size [mm]:
15
Cone Pitch:
1/8
Thread Size:
R-M12×1,25
Weight [kg]:
0,45
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Quality Ball joint for Mitsubishi LANCER 1.5 76 hp Petrol
Wide selection of new ball joint for Lancer IV Saloon (C6_A, C7_A) 1.5 (C62A) Petrol 76 hp, priced from £7.72 to £24.72. Choose from 41 trusted manufacturers.
Tried, tested, and top-rated: Ball joint for Mitsubishi Lancer 4 Limousine (C6_A, C7_A) 1.5 (C62A) 76 hp Petrol
More
Ball joint for MITSUBISHI LANCER models
More
Top spare parts this car
MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5 (C62A) 76 hp Brake discs
MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5 (C62A) 76 hp Shock absorber
MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5 (C62A) 76 hp Brake pads
MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5 (C62A) 76 hp Suspension arm
MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5 (C62A) 76 hp Engine oil
MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5 (C62A) 76 hp Clutch kit
MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5 (C62A) 76 hp Wheel hub
MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5 (C62A) 76 hp Wheel bearing
MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5 (C62A) 76 hp Air filter
MITSUBISHI Lancer IV Saloon (C6_A, C7_A) 1.5 (C62A) 76 hp Coil spring
More
Top Prices
Onlinecarparts.co.uk guarantees high-quality car parts at very attractive prices.
Shipping costs
Free shipping within the UK on purchases of over £140 except when ordering bulky items, core parts, or tyres.
Our payment methods
We accept PayPal, Visa, Discover, American Express, and bank transfer.
Wide choice
Our product range currently includes over 2,500,000 car parts.