Cv joint for Mazda 626 GC 2.0 D 63 hp Diesel
Details
-
Fitting Position:
Front Axle Right
-
External Toothing wheel side:
26
-
Internal Toothing wheel side:
25
-
Sealing Ring Diameter [mm]:
42,3
-
Diameter [mm]:
82
-
Condition:
New
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
Fitting Position:
Wheel Side
-
External Toothing wheel side:
26
-
Internal Toothing wheel side:
25
-
Transmission Type:
Manual Transmission, Fully Automatic
-
Sealing Ring Diameter [mm]:
52
-
Diameter [mm]:
89,5
-
Diameter 1 [mm]:
25,8
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
JAPKO 62302 Joint kit, drive shaft Wheel Side
Details
-
-
Construction Year from:
01/1984
-
Fitting Position:
Wheel Side
-
Length [mm]:
93
-
Overall Length [mm]:
149
-
External Toothing wheel side:
26
-
Internal Toothing wheel side:
23
-
Sealing Ring Diameter [mm]:
55
-
Specification:
Groove type: MIDDLE
-
External Thread [mm]:
20 x 1,5
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
Fitting Position:
transmission sided
-
External Toothing wheel side:
26
-
Internal Toothing wheel side:
25
-
Sealing Ring Diameter [mm]:
35
-
Diameter [mm]:
84
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
Fitting Position:
Wheel Side, Front Axle
-
External Toothing wheel side:
26
-
Internal Toothing wheel side:
25
-
Sealing Ring Diameter [mm]:
52
-
Diameter [mm]:
90
-
Packaging width [cm]:
10,5
-
Packaging height [cm]:
10,5
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
STATIM C.470 Joint kit, drive shaft Wheel Side
Details
-
-
Fitting Position:
Wheel Side
-
Vehicle type:
GCFJ, GCFP
-
Engine Code:
RF
-
External Toothing wheel side:
26
-
Internal Toothing wheel side:
25
-
Sealing Ring Diameter [mm]:
52
-
Joint Type:
CV Joint
-
Diameter [mm]:
90
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
-
Fitting Position:
Front Axle Left, Front Axle Right, Wheel Side
-
Transmission Type:
Automatic Transmission, Manual Transmission
-
Fitting Position:
A1
-
Length [mm]:
153
-
External Toothing wheel side:
26
-
Internal Toothing wheel side:
25
-
Sealing Ring Diameter [mm]:
52
-
Thread Size:
M20X1,5
-
Technical Information Number:
Middle groove
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
This is a standard picture
SAMKO 21K190 Joint kit, drive shaft Wheel Side, Front Axle
Details
-
Fitting Position:
Wheel Side, Front Axle
-
External Toothing wheel side:
26
-
Internal Toothing wheel side:
25
-
Sealing Ring Diameter [mm]:
52
-
Machined:
with groove in inner part (middle)
-
Diameter [mm]:
89,5
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
This is a standard picture
LPR KMZ190 Joint kit, drive shaft Wheel Side, Front Axle
Details
-
Fitting Position:
Wheel Side, Front Axle
-
External Toothing wheel side:
26
-
Internal Toothing wheel side:
25
-
Sealing Ring Diameter [mm]:
52
-
Diameter [mm]:
89,5
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
LÖBRO 302174 Joint kit, drive shaft Manual Transmission, Automatic Transmission, Wheel Side, Front Axle Left, Front Axle Right, NBR (nitrile butadiene rubber)
Details
-
-
Fitting Position:
Wheel Side, Front Axle Left, Front Axle Right
-
Transmission Type:
Manual Transmission, Automatic Transmission
-
Length [mm]:
151
-
External Toothing wheel side:
26
-
Internal Toothing wheel side:
25
-
Sealing Ring Diameter [mm]:
52
-
Joint Type:
CV Joint
-
Machined:
with groove in internal component
-
Joint Diameter [mm]:
86
-
Thread Size:
M20x1.5
-
New Part
-
Bellows Material:
NBR (nitrile butadiene rubber)
-
Condition:
New
More +
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
This is a standard picture
JPN 70P3016-JPN Joint kit, drive shaft Front Axle Right, transmission sided
Article number:
70P3016-JPN
Details
-
Fitting Position:
Front Axle Right, transmission sided
-
Condition:
New
If a part is temporarily unavailable, you could substitute it with these parts:
This is a standard picture
BUGIAD 51360 Joint kit, drive shaft Wheel Side
Details
-
Fitting Position:
Wheel Side
-
Length [mm]:
153
-
External Toothing wheel side:
26
-
Internal Toothing wheel side:
25
-
Sealing Ring Diameter [mm]:
52
-
Specification:
Groove Type: Middle
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
Details
-
-
Fitting Position:
Front Axle, Wheel Side
-
Construction Year from:
01/1984
-
Fitting Position:
A1
-
Length [mm]:
148
-
External Toothing wheel side:
26
-
Internal Toothing wheel side:
23
-
Sealing Ring Diameter [mm]:
52
-
Thread Size:
M20X1,5
-
Technical Information Number:
Middle groove
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
ASHIKA 62-03-302 Joint kit, drive shaft Wheel Side
Article number:
62-03-302
Details
-
-
Construction Year from:
01/1984
-
Fitting Position:
Wheel Side
-
Length [mm]:
93
-
Overall Length [mm]:
149
-
External Toothing wheel side:
26
-
Internal Toothing wheel side:
23
-
Sealing Ring Diameter [mm]:
55
-
Specification:
Groove type: MIDDLE
-
External Thread [mm]:
20 x 1,5
-
Condition:
New
OEM-Number
If a part is temporarily unavailable, you could substitute it with these parts:
This is a standard picture
EURODRIVELINE OJ-MZ-0468 Joint kit, drive shaft Manual Transmission, Automatic Transmission, Wheel Side, Front Axle Left, Front Axle Right, for vehicles without ABS
Article number:
OJ-MZ-0468
Details
-
-
Braking/Drive Dynamics:
for vehicles without ABS
-
Transmission Type:
Manual Transmission, Automatic Transmission
-
Fitting Position:
Wheel Side, Front Axle Left, Front Axle Right
-
Length [mm]:
154.6
-
External Toothing wheel side:
26
-
Sealing Ring Diameter [mm]:
52
-
Braking/Drive Dynamics:
for vehicles without ABS
-
Joint Diameter [mm]:
89.5
-
Condition:
New
OEM-Number
Free delivery on this item
Notify when in stock
If a part is temporarily unavailable, you could substitute it with these parts:
Quality Cv joint for Mazda 626 2.0 D 63 hp Diesel
Wide selection of new cv joint for Mazda 626 GC 2.0D (GC10F1) Diesel 63 hp, priced from £21.96 to £66.24. Choose from 26 trusted manufacturers.
Tried, tested, and top-rated: Cv joint for Mazda 626 II (GC) 2.0 D (GC10F1) 63 hp Diesel
More
Joint drive shaft for MAZDA 626 models
More
Top spare parts this car
More
Top Prices
Onlinecarparts.co.uk guarantees high-quality car parts at very attractive prices.
Shipping costs
Free shipping within the UK on purchases of over £140 except when ordering bulky items, core parts, or tyres.
Our payment methods
We accept PayPal, Visa, Discover, American Express, and bank transfer.
Wide choice
Our product range currently includes over 2,500,000 car parts.