A pendulum support is a rod that has floating bearings on both ends. The floating bearing takes up forces of the longitudinal direction, thus the rod can move forward and backward, but not laterally. Torque also is not transmitted. In the cars pendulum supports are installed in different locations. For instance, transmission can be mounted with a pendulum support. The engine and other parts can be connected to the body via pendulum support. Also the wheels can be stabilized with a pendulum support.
Pendulum supports consist of a metal rod, which is often fitted with rubber pads on the ends. Because of the high mechanical load floating bearings are wearing car parts. As a result, a free play appears that can lead to rattle noises. Particularly, this problem is typical for old cars. It is not difficult to replace a pendulum support, since it is a simple mechanical component. However, it will be necessary to dismantle many other parts to reach the pendulum support. In principle, a shade-tree mechanic can replace the pendulum support.
It is also often used the notion of a tie-rod. Some car parts makers use this term only for the pendulum support that is located between the axle guide and the stabilizer. But since there is no one single term and car parts makers use different terms for the same car parts, it is necessary to be carefully. It is not recommended to install used pendulum supports as it is difficult to evaluate their quality. Do you need coolant temperature sensor, slave cylinder, crankcase, oil temperature sensor, oil filter, fan, oil dipstick, or another car part? In our online store you will find a wide range of car parts, which meet the highest standards.
© 2012 www.Onlinecarparts.co.uk: Pendulum support cheap online: buy Pendulum support from NK, Metzger, Febi Bilstein, Vaico, TRW